Designation : Professor & Principal
Department : MECHANICAL ENGINEERING
Email.id : principal@nscet.org
Contact :+91 94434 88999 , +91 98426 85138
EDUCATION :
Ph.D. in Mechanical Engineering (Specialization area is Composite Tool Materials),Anna University, 2011-2017.
M.E. in Manufacturing Engineering. Anna University of Technology, Trichy, 2008-2010.
M.B.A in Production Engineering, Madurai Kamaraj University, 2002-2004.
B.E in Mechanical Engineering, Madras University, 1996-2000.
EXPERIENCE :
Working as Professor & Principal of Nadar Saraswathi College of Engineering and Technology from June 2017 onwards.
Worked as Professor and Vice Principal in Nadar Saraswathi College of Engineering and Technology for Four Years.
Worked as Assistant Professor in Bharath Niketan Engineering College for Two Years.
Worked as Assistant Professor, Associate Professor in Nadar Saraswathi College of Engineering & Technology for Three Years.
Worked as Lecturer, Senior Lecturer & Head of the Department in Sri Sowdambika Polytechnic College, Arasan Ganesan Polytechnic College, VSVN Polytechnic College for more than Eight Years.
RESEARCH CONTRIBUTION - LIST OF PUBLICATIONS:
C. MathalaiSundaram, R.Sivasubramanian, M.Sivakumar, 2008, ‘Development of new metal matrix composite electrodes for electrical discharge machining through powder metallurgy process’ Carbon – Science and Technology, International Journal, Vol. 6, No.4, pp. 34-40. ISSN 0974-0546.
C.MathalaiSundaram, R.Sivasubramanian, M.Sivakumar, 2014, ‘Multifarious Response Optimization For EDM By CU/WC Electrode Using Grey Analysis’, International Journal of Engineering Research and Technology, Vol. 9, No. 24, pp. 28093-28099.ISSN 0973-4562.
C.MathalaiSundaram, R.Sivasubramanian, M.Sivakumar, 2013, An Experimental Investigation on Machining Parameters of Electrical Discharge Machining of OHNS Steel, International Journal of Printing, Packaging & Allied Sciences, Vol. 2(12), pp.3392- 3398. ISSN 2278 - 0181.
A.VembathuRajesh, C. MathalaiSundaram, V.Sivaganesan, B.Nagarajan, M.Pradeep, 2015, Design fabrication and performance analysis of concave solar still International Journal of Emerging Technology and Innovative Engineering, Vol. I, ISSN: 2394 - 6598.
S.Ramu, S.Arunpandian, T.Muthuramalingam, C.MathalaiSundaram, 2015, Experimental investigation of mechanical properties in hybrid natural fiber, International Journal of Emerging Technology and Innovative Engineering, Vol.I, ISSN: 2394 - 6598.
N.EswaraPrasath, S.Shanmugam, C.MathalaiSundaram, A.VembathuRajesh, 2015,‘Development of three axes lifting modern trailer’, International Journal of Emerging Technology and Innovative Engineering, Vol.I, ISSN: 2394 – 6598.
MathalaiSundaram C, Sivasubramanian R, Chandrasekaran K, 2016, Experimental investigations of new powder Metallurgy electrode in electrical discharge Machining of OHNS using Taguchi method’, International Journal of Advanced Engineering Technology, Vol. VII/559-564 E-ISSN 0976-3945.
A.Vembathurajesh, C.MathalaiSundaram, V.Sivaganesan, B.Nagarajan&R.Radhakrishnan, 2015 ‘Design Fabrication And Performance Analysis of Concave Basin Pyramid Type Solar Still With Various Parameters’, International Journal of Applied Engineering Research ISSN 0973-4562 Volume 10, Number 15.
T.Vivekanandan, R.Arunkumar, V.Saravanakumar, B.Nagarajan&C.MathalaiSundaram, 2015, ‘Experimental Investigation of Sic & Tic Reinforced With Aa7075 Metal Matrix Composites’, International Journal of Applied Engineering Research ISSN 0973-4562 Volume 10, Number 15.
C.MathalaiSundaram, R.Sivasubramanian, M.Sivakumar, 2015, Experimental Study On OHNS in EDM Using Cu/Tic Electrode International Journal Of Applied Engineering Research ISSN 0973-4562 Volume 10, Number 15.
C.MathalaiSundaram,EswaraPrasath, Benham, Sivakumar, 2018, A New Grouping Method in Selective Assembly for Minimizing Clearance Variation using TLBO, Applied Mathematics and Information Sciences, ISSN 1935-0090.
C.MathalaiSundaram, R. Sivasubramainyan, M. Sivakumar, Malaichamy T 2016,Simulated Annealing Algorithm for Minimising the surplus parts in Selective Assembly –A Software Approach, Asian Journal of Research in Social Sciences and Humanities,Volume.6, No.9, September 2016, pp 1567-1586, ISSN 2249-7315.
PATENT :
Title of Invention :Automation in Portable Oil Seal Assembly Machine
Patent Application No : 201741002053 A
Date of filing Application : 19.01.2017
Publication Date : 03.02.2017
International Classification : F15B 21/00
MEMBERSHIP IN PROFESSIONAL BODIES:
ISTE LIFE MEMBER – LM 68577
Member of Society of Mechanical Engineers
CERTIFICATION:
Certified and honored with Membership of MAX Academy for Excellency,Chennai.
Recognized as Empaneled Service provider to Install Rain Water Harvesting Structures by TWAD board.
CONFERENCE –INTERNATIONAL LEVEL:
Presented a Paper in International Conference, titled “Nanorobot Architecture for medical Target Identification” in SCITECH’11 at Nadar Saraswathi College of Arts & Science on 21st January 2011.
Presented & Published a Paper in International Conference, titled “An Experimental Investigation on Machining Parameters of Electrical Discharge Machining for OHNS steel” in INCAMA 2013 at Kalasalingam University on 28-30, March 2013.
Presented a Paper in International Conference on “Advanced Design and Manufacturing” organized by Department of Mechanical Engineering, Sethu Institute of Technology on 17th& 18th March 2014.
Presented a Paper in International Conference on Green Energy & Green Environment,titled “Designing Fabricating & Performance Analysis of Concave Basin Pyramid Type Solar Still” in SciTech’15 at Nadar Saraswathi College of Arts & Science on 21st Jan,2015.
Presented a Paper in International Conference on Emerging Trends in Engineering (ICETET’18), titled “Development of Biodegradable Magnesium AZ31 Alloy for an Orthopedic Application” at Pandian Saraswathi Yadav Engineering College on 10th& 11th March 2017.
Presented a Paper in International Conference on Futuristic Innovation in Mechanical Engineering and Manufacturing Management (ICFMEMM-17), titled “Fabrication of Biodegradable Magnesium AZ91 Powder Metallurgy Technique” at M. Kumarasamy College of Engineering on 30th& 31st Mar 2017.
Presented a Paper in International Conference on Futuristic Innovation in Mechanical Engineering and Manufacturing Management (ICFMEMM-17), titled “Design and Analysis of TRI-AXIAL Hydraulic Trailer using Ansys” at M. Kumarasamy College of Engineering on 30th& 31st Mar 2017.
Presented a Paper in International Conference on Contemporary Design and Analysis of Manufacturing & Industrial Engineering Systems (CDAMIES – 2018), titled “Experimental Analysis of Stir Casting Electrode (AI6063, B4C) for Electrical Discharge Machining” at National Institute of Technology, Tiruchirappalli on 18th January 2018.
Presented a Paper in International Conference on Contemporary Design and Analysis of Manufacturing & Industrial Engineering Systems (CDAMIES – 2018), titled “Experimental Investigation of AA7075 reinforced SiC, TiC and B4C MMC” at National Institute of Technology, Tiruchirappalli on 18th January 2018.
Presented a Paper in International Conference on Emerging Trends in Engineering (ICETET’18), titled “Mechanical and Morphological Investigation of Biodegradable Magnesium AZ31 Alloy for an Orthopedic Application” at Pandian Saraswathi Yadav Engineering College on 9th& 10th March 2018.
Presented a Paper in International Conference on Emerging Trends in Engineering (ICETET’18), titled “Design Analysis of Fabrication of Tri and Hydraulic Trailer” at Pandian Saraswathi Yadav Engineering College on 9th& 10th March 2018.
Presented a Paper in International Conference on Emerging Trends in Engineering (ICETET’18), titled “Prediction of surface roughness for Aluminium 6061 using Machine Vision System” at Pandian Saraswathi Yadav Engineering College on 9th& 10th March 2018
CONFERENCE –NATIONAL LEVEL:
Participated two-day National Conference on “Industrial Expectation and Institutional Preparation” ISTE-CON 2008 at Sudharsan Engineering College on 13 & 14 August 2008.
Presented a Paper in National Level conference, titled “Application of New Tool Material for Electrical Discharge Machining” in GTMTS – 2010 at Sethu Institute ofTechnology on 22nd& 23rd, April 2010
Presented a Paper in National Level Conference, titled “Application of New Tool Material for Electrical Discharge Machining” in MECHPONET10 at Dhanalakshmi Srinivasan Engineering College on 18th March 2010.
Presented a Paper in National Conference, titled “Entrepreneurship and Management” organized by Anna University of Technology, Madurai on 18th March 2011.
Published a paper in National Level Conference, titled “State of the Art Electrical Discharge Machining” in FLAME 2012 at Bharath Niketan Engineering College on 5th March 2012
Presenteda Paper in National Conference, titled “Innovations and Advances in Mechanical Engineering (NCIAME-15)”, at Nadar Saraswathi College of Engineering & Technology, 13th March 2015.
Presenteda Paper,titled “Experimental investigation of Mechanical Properties in Hybrid Natural Fiber”, National Conference on Advances in Mechanical Engineering, Karpagam University, 21st March 2015.
Presented a Paper inNational Level Conference on Materials and Metallurgical Applications, titled“Experimental Investigation of Morthological and Mechanical Properties of New Composite Electrode for Electrical Discharge Machining”,at Nadar Saraswathi College of Engineering and Technology, 31st March 2016.
Presented a Paper inNational Level Conference on Materials and Metallurgical Applications, titled“Development of New Composite Electrode Al-6063 and B4C through Stir Casting Method for Electrical Discharge Machining”,at Nadar Saraswathi College of Engineering and Technology, 31st March 2016.
Presented a Paper inNational Level Conference on Recent Trends in Advanced Materials(RTAM -16), titled“Development of New Composite Electrode Al-6063 and B4C through Stir Casting Method for Electrical Discharge Machining”,at Nadar Saraswathi College of Engineering and Technology, 29thMarch 2016.
Presented a Paper in National Conference on New Scientific Creations in Engineering and Technology, titled “Design Analysis and Fabrication of Universal Joint Aassembly for tri-axial Hydraulic Trailer” at Nadar Saraswathi College of of Engineering & Technology on 27th Mar 2017.
Presented a Paper in National Conference on New Scientific Creations in Engineering and Technology, titled “Study and Analysis on Temperature Band of Steel Hot Foraing” at Nadar Saraswathi College of of Engineering & Technology on 16th Mar, 2018.
Presented a Paper in National Conference on Advances in Mechanical Engineering Applications(NCAMEA-18), titled “Improve the efficiency of Crystallizer using planetary gear box” at Theni KammavarSangamCollege of Technology on 23rdMar, 2018.
WORKSHOP ATTENDED:
Attended two days’ Workshop on Design of Compression and Transfer moulds organized by Department of Plastic Technology in S. Vellaichamy Nadar Polytechnic College, Virudhunagar on 9th and 10th December 2006.
Attended one-day Workshop on “Fascinating Application of Thermal Engineering” organized by Department of Mechanical Engineering in RVS College of Engineering & Technology, Dindigul on 28th January 2012.
Attended one-day Workshop on “Polymer Composite Manufacturing and Procession –Principles, Techniques and Applications” organized by Department of Mechanical Engineering & Department of Chemistry in Thiagarajar College of Engineering, Madurai on 05 March 2013.
Attended one-day National Level Workshop on “Basic Insight of Fundamentals of CFD” organized by Nadar Saraswathi College of Engineering & Technology, Theni on 1st October 2013.,/br>
Attended one-day Workshop on “Research Methodology” organized by Centre for Faculty development Anna University, Chennai on 12 December 2014.
Attended two days National Level Workshop cum Championship on “ROBOTICS” organized by Magniva Technology pvt.ltd, Megalith 14, IIT-Kharagpur on 17th& 18th February 2014.
Attended one-day Workshop on “Intellectual Properties Rights & Innovations” organized by Nadar Saraswathi College of Engineering & Technology, Theni. In Association with Anna University, Chennai. Centre for Intellectual Property Rights (CIPR) on 05 December 2015.
Attended one-day National Workshop on “NIRF – National Institutional Ranking Framework” organized by ELOIT Innovations on 21 December 2015.
Attended one-day Workshop on “Highly Effective Teaching & Learning Methodologies” organized by Department of Science and Humanities in Nadar Saraswathi College of Engineering & Technology, Theni. on 9th January 2016.
Attended one-day Workshop on “NBA Process & Documentation” organized by Nadar Saraswathi College of Engineering & Technology, Theni, on 1st November 2016.
SHORT TERM TRAINING PROGRAMME:
Participated in the short term Training Programme on “Integrating Human Values and Social Ethics in Technical Education” organized by Arasan Ganesan Polytechnic College Sivakasi and ISTE, New Delhi, from November 22nd to December 3rd 2004.
Participated in an AICTE Sponsored Short Term Course on “Recent Advances in Automotive Systems” organized by the Department of Engineering Design from 2nd to 6thFebruary, 2015.
Participated in an AICTE Sponsored Short Term Course on “Recent Trends in Composites Manufacturing” organized by the Department of Aerospace Engineering in Centre for Continuing Education Indian Institute of Technology Madras from 10th to 14th February, 2014.
FACULTY DEVELOPMENT PROGRAMME:
Organized two days Faculty Development Programme on “Crafting Mentors Towards Excellence” Sponsored by Anna University of Technology Madurai on 2nd and 3rd April2011.
Attended two days Faculty Development Programme on “Thermal Engineering” organized by Department of Mechanical Engineering in Bharath Niketan Engineering College Sponsored by Anna University of Technology Madurai on 21st and 22nd March 2011.
Attended one-day Faculty Development Program on “How to Communicate Effectively” organized by the Department of English in Nadar Saraswathi College of Engineering & Technology on 17th December 2014.
Attended one-day FacultyDevelopment Program on “Photoshop Tools” organized by MaxMindMedia in Nadar Saraswathi College of Engineering & Technology on 18th December 2014.
Attended two days FacultyDevelopment Program on “Crafting Mentors Towards Excellence” organized by Nadar Saraswathi College of Engineering & Technology on 9th& 10th June 2017.
SEMINAR ATTENDED:
Attended one-day Seminar on “Effective Teaching and Learning Process” organized by Jayaram College of Engineering & Technology on 22nd August 2009.
Attended one-day International Seminar on “Sustainable Environmental Awareness through Educational Media” organized by Anna University of Technology Madurai and National Institute of Technical Teachers Training and Research (NITTTR), Conduct by Anna University of Technology Madurai on 26th November 2010.
Attended two days National Level Seminar on “Solar Energy Conversion with Nano Particles – NSSECNP’11” organized by Department of Chemistry & Mechanical Engineering in Velammal College of Engineering and Technology Madurai on 14th& 15th October 2011.
Attended one day National Seminar on “Meta – heuristic Algorithms and Application in Engineering” organized by Department of Mechanical Engineering SACS M.A.V.M.M.Engineering College,Madurai on 28th December 2011.
Attended one-day Seminar on “Advances in Non-Conventional Machining Processes (ANMP 2013)” organized by The Department of Manufacturing Engineering, College of Engineering Guindy on 23rd February 2013.
ACADEMIC PERFORMANCE:
Presented Academic Excellence Award for 94% Result in Engineering Mechanics of Mechanical Department in Bharath Niketan Engineering College on April / May 2012 Examinations.
Presented Academic Excellence Award for 95% Result in Engineering Mechatronics of Mechanical Department in Bharath Niketan Engineering College on November / December 2012 Examinations.
Presented Academic Excellence Award for 93% Result in Engineering Graphics of Mechanical Department in Bharath Niketan Engineering College on November / December 2012 Examinations.
Presented Academic Excellence Award for 98.36% Result in Engineering Nuclear Engineering of Mechanical Department in Nadar Saraswathi College of Engineering & Technology onNovember / December 2014Examinations.
Presented Academic Excellence Award for 100% Result in Metal Cutting Theory and Practice of Mechanical Department in Nadar Saraswathi College of Engineering & Technology on November / December 2014Examinations.
Presented Academic Excellence Award for 100% Result in Basic Civil &Mechanical Engineering of Mechanical Department in Nadar Saraswathi College of Engineering & Technology on April / May 2015Examinations.
Presented Academic Excellence Award for 100% Result in Optimization Techniques in Manufacturing of Mechanical Department in Nadar Saraswathi College of Engineering & Technology on April / May 2015Examinations.
Presented Academic Excellence Award for 100% Result in Metal Cutting Theory and Practiceof Mechanical Department in Nadar Saraswathi College of Engineering & Technology on November / December 2015Examinations.
Presented Academic Excellence Award for 98.28% Result in Engineering Materials and Metallurgy of Mechanical Department in Nadar Saraswathi College of Engineering & Technology on April / May 2016Examinations.
Presented Academic Excellence Award for 100% Result in Optimization Techniques in Manufacturing of Mechanical Department in Nadar Saraswathi College of Engineering & Technology on April / May 2016Examinations.
SYMPOSIUM :
Organizedone-day National Level Technical Symposium on “Trenchantz 2k15” Department of Mechanical Engineering in Nadar Saraswathi College of Engineering & Technology, Theni, on 9th September 2015.
QUALITY IMPROVEMENT PROGRAMME:
Participated in the Short Term Course on “CNC Machines” organized by NITTTR, Chennai, from 09.10.2006 to 13.10.2006.
CITATION AND INDEX OF MY RESEARCH ARTICLES:
Research articles are Indexed in Elsevier, Scopus, Sci Index, Ulrich, DOAJ,EBSCO and Google Scholar.,/br>
Research Articles Cited in Cite Seer, I-SCHOLAR,Free patent online and Google Scholar.
AWARDS RECEIVED:
Awarded by Tamil Nadu Carom Association as Best Sports Builder Award
Appreciated with My Stamp for best Service as Principal in Nadar Saraswathi College of Engineering & Technology by Indian Postal Service &Nadar Saraswathi College of Education.
